Category: Router Setup Router Setup – Default Router Setup Guide

A router is an electronic device that connects your systems to the network. It is used to send data over the network in the form of packets. It places the packets (data) to its destination address securely. With the increase of internet user and income from the internet all business established need to keep their office premises under network and for that router plays a very important role. It divides the network and enables you to keep connected all your systems within a range. There are different types of routers- wifi and normal router. Wi-Fi router is popular as it is portable, and the main is its network coverage which is broad than the normal router. If you want to keep your premises in such a way that from every corner you can surf internet then Wi-Fi router is the best.

Products quality may differ from manufacturer to manufacturer but the router main IPaddress remain always same. All manufacturers use a default IPaddress that ranging from to That means whatever router you are using, its IP address must remain within this range. So below I am sharing detail information about how to set up router and what stands for address Router: Router Setup is the default gateway used by many router manufacturers to manage and to build the network.This IP address is the only way through which you can get access to the control panel of a router those are using this default IP address. You can change all the default setting and IP address by accessing to the control panel of any router. But to configure or to build a Wi-Fi network you need to 192.168.l.l router setup means you have set up your router by using your computer. Router Setup Step by Step: Router Setup

Step 1: Connect Router through Lan Cable

Before the invention of the router, we need to connect our system to a broadband connection directly through a cable that raises many problems like limited connection and much more. But with the Wi-Fi router total scenario has changed. To setup, a wireless router you need to connect it to your system by a LAN cable. If you have not installed LAN driver in your PC then installed it now. Without this driver, you won’t be able to connect the router. After successful connection a gear icon will generate in the taskbar, that means the router is successfully connected on your system.

Step 2: Browse the IP address

Now you need to close the internet connection if any. Open any of your PC browsers and enter the default IP address 192.168.l.l It will open the main login page which is the gate to enter the management console of a router.

Step 3: Enter Credentials Router Setup

Every router comes with default username and password which you can change as per your requirements. In maximum router username and password, both are “admin” or sometimes username is “admin” and password is “Password”. Once you entered your login credentials, full router management console will be right in front of your window.

Your connection is complete and you are now authorized to control and to change all default settings of your router. As there are many hackers who are trying to hack your network so it is recommended to change the default IP address and login credentials. But for that, you need to remain comfortable with all the basic settings of the router control panel. Below I am providing an overview of the Control panel. Router Setup

Here you can see whether your router is connecte to a network or not in the Status option. In the above screenshot, there are many menu following which you can manage and change the settings. From all, the main and the basic option are Network Settings and Security. Going to the network settings you can change the default IP address and also can allot IP address for systems.In the Security option, you can change the default username and password and also can provide a name of your network.

Control panel or Router login management console may differ with the brand of the router but the basic settings always remain same. If you get familiar with any router setup then you can easily get familiar with other.


This is all about the router setup. By following the above-mentioned steps, you can easily set up your router. I think you have got all the essential and basic information regarding the Admin If you are facing any problem regarding your router setup then drop your query in the below comment box.

How to Setup Your D-Link Router – Step by Step Process

D-Link Routers come with the simple and convenient Setup Wizard so as to make the router setup and configuration easier and faster for you. The D-Link Router Setup is simple which involves connecting the router to the modem and then connect it with the computer using Ethernet cables for network connection and then run the Setup Wizard, it is that simple.

However, the process may vary slightly depending upon the network type and connection you are using. Below is the step by step guide for D-Link Router Setup and ensure to follow each step carefully for successful setup of the router for home and office networks.

Guide to Setup a D-Link Router:

Step 1 – Establishing Connection between Router and Modem

The package of your D-Link Router comes with all the essentials including the power adapter. So, take the power adapter and connect the router to your wall power outlet and turn on the power of your router. Now take a Ethernet cable and insert its one end at the WAN port of the router and the other end to the modem. Usually the color of the WAN port is yellow so as to differentiate it from other ports. But in some models of D-Link routers the WAN port is colored in black color so ensure to check the model you are using for correct ports.

Some of the D-Link router models also come with built-in DSL modem. So, rather than connect the device to any other modem using Ethernet Cable, you can connect it directly to the device’s DSL Port available at back with a Phone Cord. Now wait till the WAN and Power status lights are on. It may take few minutes to turn on.

Step 2 – Connecting Router to the Computer

There are two ways to connect the router to the computer – the wireless mode and the wired mode.

To connect the PC in wired mode you need to use Ethernet cable and insert it in the Ethernet port of your system and the other end on the Ethernet port of the D-Link Router. You may insert the cable in any numbered port of your router except the WAN port as it is only used to be connected to the modem.

Click on the “Network” icon of your system and find the list of available Wireless Connections. By default the router name is D-Link and hence you need to click on it to establish wireless connection. Enter the network key or password written on configuration card and then click on “Connect” to establish connection wirelessly.

Step 3 – Setup of D-Link Router

Launch the web browser on your PC and enter “” or “” on the address bar, depending upon the model of router you are using. Now the login page of your router will open. You need to click on “OK” button unless you have not set any username or password for it. However, the default username and password for D-Link routers is admin as username and admin as password. However, in some models the password field must be justify blank. So, login according to the model you are using.

Now you need to start the “Setup Wizard” so as to configure the router. You have to click on “Run Wizard” or next button and the router will choose most of the settings automatically based on the common defaults for connection types. You will also be asked with few questions for successful D-Link Router Setup.

You need to choose the radial button available next to connection type and in most of the models you need to choose the “DHCP” unless you are asked to provide the IP address and such case you need to choose “Static”

If you are ADSL or DSL user, then ensure to choose “PPPoE” and you will prompted with username and password and this will provided by the internet provider. Enter the credentials and click “Next”. Now enter the new network name and set a strong password for local wireless network and click on “Next”.

Choose the time zone from the drop down menu and click next. Now you need to save the configuration by clicking on the “Save” and Restart the system to complete the setup process. l IP Address - 192.168.l.l Default Login Router Passwords © 2017 Frontier Theme